What is the reason why the disc bearings depreciate too fast?

Rotary disk bearings play a very important role in many mechanical equipment, and parts are also more important, so friction and depreciation will inevitably occur in the process of use, but some mechanical rotary disk bearings will depreciate faster, what is the reason? Here we will give you an analysis.

Because the rotating disc bearing is a load-bearing component, the reasons for its excessive wear and tear are generally as follows:

  1. Improper type selection: improper type selection of turntable bearings makes it incompatible with equipment and model. Therefore, abnormal friction will inevitably occur during operation, resulting in excessive damage. In this case, it is necessary to replace the turntable bearings in time and select the appropriate turntable bearings.

  2. Improper design or manufacturing materials: improper design and material selection of turntable bearings result in fast consumption of turntable bearings. To adjust the design and material of the turntable bearing in time, it is necessary to communicate with the manufacturer in order to improve the phenomenon of excessive consumption.

  3. Insufficient lubrication: Lubricating oil or grease, which is usually improper for you to use, insufficient lubrication, so for the use of turntable support wear is also very large.

  4. Normal consumption: the normal consumption of rotary bearing, rotary bearing in the absence of any defects, there will be consumption problems. This is unavoidable, only in strict accordance with the correct method of use, as far as possible to reduce the loss.

From a variety of disc bearings depreciation rate analysis, the above is the reason and solution for the rapid wear and tear of disc bearings, if your disc bearings have no quality problems, then you can only start from machinery, or lubrication, etc.